Lifting safety regulations

7. Lifting safety regulations
1. The operator must undergo professional safety technical training, pass the examination, and hold the certificate.
2. Warning signs should be set up at the hoisting site, and special personnel should be set up to monitor.
3. Do not work in the open air when there is heavy snow, fog, heavy rain and strong wind above 6.
4. Before operation, the operation unit should check the lifting machinery, rigging, lifting gear, safety devices, etc., to ensure that they are in good condition.
5. Lifting should be carried out according to the specified load, and the lifting gear and rigging should be selected and used after calculation, and should not be overloaded.
6. Pipes, pipe racks, poles, mechanical and electrical equipment, etc. should not be used as hoisting anchor points.
7. Test lifting should be carried out before lifting, check all the mechanical tools and ground anchors before the test lifting, rectify the problem immediately, and confirm that the normal can be formally lifted.
8. Command personnel should wear clear signs and conduct command according to contact signals. Lifting machinery operators, cable personnel should comply with the relevant provisions.

Lifting safety regulations Images